London-Gift

Souvenirs from England and other countries

online store

Alcohol Breath Tester. Instructions

In my store there are not only souvenirs from England, but also many useful things.

For example, here's a tester for measuring alcohol levels.

In this article you can read the instructions. for use and use.

How to Test:

1. The "Blow" symbol is displayed when warm-up , and the 10 to 0 countdown is started that indicates the tester is in testing mode.

2. Near and blow into the breath inhaler for 3-5 seconds.

3. Read the test result from the alcohol tester LCD.

4. The "Caution" symbol is displayed if the alcohol concentration the level:

      0.02% BAC(or 0.2g/l) to 0.05% BAC(or 0.5g/l).

      0.05% BAC(or 0.5g/l) to 0.08% BAC(or 0.8g/l).

5. The "Danger" symbol is displayed with beeping audible alert if the alcohol concentration is the level: 

      over & equal 0.05% BAC(or 0.5g/l).

      over & equal 0.08% BAC(or 0.8g/l)

Auto power off :

1. After the result displays for about 15 seconds, the "OFF" Symbol will appear for 2-3 seconds, and the alcohol tester will be turned off.

2. If no blow into the breath inhaler at the test mode, the LCD will display "0.00" value.

Note:

To obtain a more accurate result, the manufacturer recommends you to check repeatedly 2 or 3 times.

Precaution:

After drinking, it is recommended to wait 20 minutes. It is because in 20 minutes approximately, alcohol would be absorbed into the blood from the digestive organs, and residual alcohol remaining in the mouth will take this long to dissipate.

For an accurate result, do not repeat testing within 3 minutes from the last test.

Do not smoke and eat for 20 minutes prior testing.

Do not use chemicals such as benzene, thinner or petrol.

Clean the tester before use. Do not blow liquid into the breath pipe.

Do not use any excitant substances near the tester, such as painkillers, insecticides, alcohols.

Do not place the tester in the closed environment with contaminated air.

Modifying or tampering with the unit's internal components may cause a malfunction.

The unit is designed to be used as an aid to promote reasonable driving. It should not be used in anticipation of the use or operation of vehicles, machinery, or equipment.

The unit makes no references whatsoever to blood alcohol content or other such measures of intoxication promulgated by government, medical or other agencies or bodies.

The result of this alcohol gives BAC for reference only.

The manufacturer does not to take any legal responsibility.